Most people clean the exterior of the car and forget about the engine. Some are scared to clean the engine due to the many electric connectors and different parts that make up the engine. Car engines need regular cleaning to prevent rust and remove the grime and grease. When your car’s engine is clean, it will run smooth and fast. The engine’s performance will depend on how well you maintain it by making sure it’s clean throughout. Below are easy steps on how to clean your car’s engine.
8 Best Tips To Clean Your Engine
1. Prepare the car engine for cleaning
Before you start cleaning the engine, you will need to prepare it before. You can start by removing debris, leaves, and twigs that have been caught up in the engine bay. If it’s during the winter, you should look for animal nests and remove them.
Another way of preparing the engine for cleaning is by protecting the engine parts. Since you will be using water to clean, you need to make sure that some parts do not get soaked in water to prevent damages. You can start by disconnecting the battery. You can disconnect the terminals or remove the entire battery out of the car. Make sure that you cover exposed wiring and sensors with tapes or plastic bags.
You will also need to start your car and let it run for about 10 minutes. The engine will get heated, and the grease will be easy to remove. Do not let the car run for long as the engine parts will become too hot to clean.
2. Have the tools and cleaning agents ready
If you have decided to clean your car, it is important to know the tools that will be used to clean. Firstly, you should use environmentally friendly solutions that are safe for you and the environment. You should also have enough water for rinsing off the cleaning agents. The tools needed include brush, hose pipe, gloves, knee pads, wire brush, and flashlights. The best engine cleaning agent is the engine degreaser.
3. Start by removing the grease
The first step to cleaning your car engine is by removing the grease. You should use engine degreaser products that are easily available on the market. Use a spraying bottle to apply the degreaser on the engine parts. You should make sure that you use an engine degreaser that is water based so that it is not too harsh to you and the engine parts. Do not overspray the greaser as it may drip to other parts of the car. Let it soak for about five minutes.
While the greaser is still soaking, use a brush to scrub the grease where there are large deposits. As you brush, make sure that you protect yourself from the degreaser by wearing eye protection and gloves.
4. Rinse the engine
After scrubbing, rinse the engine with a lot of water. You can use a garden hose to rinse the engine completely from the grease. When rinsing, do not use water under pressure as this can make some of the engine parts to disconnect. You should inspect the engine to see if any grease has remained and you spot any, repeat the step.
5. Wash the car
After you have finished cleaning the engine, you should wash the car. It will ensure that any remaining engine degreaser or cleaning solution is removed as they can remove the painted parts of the car. If any parts may have come in to contact with the degreaser, use wax to remove the grease.
6. Cleaning the battery
The next step is to clean the battery. It is one of the most delicate steps while cleaning your car’s engine. First, you will need to remove the battery cables. Then clean the battery tray. Battery trays can take some time before they are fully cleaned as most of them are corroded. You should use a wire brush to remove the corrosion. Other cleaning products that you should use on the battery include baking soda or a corrosion neutralizer. For the baking soda, you should mix with water to act as a neutralizer. It can be used if the battery was leaking acid.
The battery terminals corrode easily, and you should soak them in an anti-corrosion chemical. Then brush off the in the mixture to make sure the battery is clean.
Make sure that you have dried all the parts before you can connect the parts of the engine that you have disconnected. Before drying, rinse off any cleaning solution that may have remained on the engine. For the engine to be dried completely, it can take about one hour. If it takes longer to dry, you can start the engine to increase the temperatures and make sure all parts are dried.
8. Check for any leaks
It is important to check if there are any leaks or grease that has not been cleaned. You can use a flashlight or brake cleaners to spot any deposits on the hard to reach areas. The process is to make sure that your engine is thoroughly cleaned.
Cleaning your engine does not have to be difficult. It can be simple and take less time when you follow the above steps. Once you learn how to clean car engine, you will enjoy driving your car around and save on costs involved in engine cleaning services and the cost of repairing and replacing damaged engine parts due to grease and grime.